Co2 laser tube 100W
Brand : ZS LASER
Product origin : CHINA
Delivery time : In 30 days
Supply capacity : 20000 pieces in one year
ZISHUO LASER TECHNOLOGY CO.,LTD, We are professional Co2 laser tube manufacturer. We have been made OEM to many big companies in oversea. With the increasing of laser tube manufacturer meanwhile competition is getting fierce, we are building own brand now. In many years, we are absolutely understood customer’s demand. So In order to meet the needs of each customer, we have three kinds of laser tube to everyone.
Product Description
Laser tube 100W
ZS (ZiShuo) laser technology Co.,ltd is manufacturing of Co2 laser tube,lens/mirror and laser machine
ZS laser can offer 40W,50W,60W,80W,100W,130W,150W Co2 laser tube and Co2 power supply. Lens Mirror is 19.05 and 20mm,FL=2 inch-5 inch.
Laser cutting engraving machine are 300mm×400mm,400mm×500mm,600mm×400mm,600mm×900mm,1200mm×900mm,1200mm×2500mm,1300mm×2500mm.
Z40,Z60,Z80,Z100,Z130, This kind of laser tube is stable laser tube, quality is very stable , minimum using life is 200days.(warranty 200days)
S80,S100,S130,S150, This kind of laser tube is enhanced, minimum using life is 300days ,the raw of Co2 laser tube body and cavities mirror is imported, meanwhile has authentic USA gas. so definitely improve power and using life .The appearance is same with EFR ‘s F series laser tube. (warranty 300days)
ZS80, ZS100, ZS130, ZS150,Co2 laser tube is using life which is more better than Z and S series. The minimum using life of ZS series is 1 year. The appearance looks more beautiful. (warranty 360days)
This is 100W laser tube , which is Z ,S and ZS series.
Laser Series: Z and S and ZS
Laser Wave Length: 10.6um.
Water-Cooling:purified water, appropriate temperature 15-25℃.
Laser Mode: low order mode.
Application: Co2 Laser Engraving etc
Working Environment:using purified water; 2 to 5 liter/minute,humidity 10-60%, clean environment, no serious pollution.
Working Current:12~20mA is appropriate (excessive current will affect laser power and laser tube lifetime).
Laser State: Laser power will be attenuated when the laser tube is used at a certain time; If the laser is pink, it is in normal condition; if the laser is white, it means the laser power is attenuate. ( Laser tube is consumable, please change a new one when it can’t meet demand due to attenuation)
100W Co2 laser tube for processing Crystal,paper and plastic:
Model | Z100/S100/ZS100 |
Length | 1400mm |
Pipe Diameter | 80±1mm |
Wavelength | 10.6um |
Catalyst coated | Yes |
Output Power Stable Value | 110W |
Max Output Power | 125W |
Triggering Voltage | 26-28KV |
Working Voltage | 20-23KV |
Triggering Current | 4-5mA |
Max Working Current | 28mA |
Type Of Cooling | Water-cooling 15-25℃ |
Spot diameter | 5±1mm |
Packing size | 1600mmx160mmx150mm |
Laser State:
1、There are two points to support the laser tube at two sides, when you install the laser tube, the two points should be in 1/4 of the laser tube;(Please when you fix Co2 laser tube on laser machine , note to bracket position)
2、On the basis of cooling water above-in and below-out, if you rotate the laser tube slightly, it will affect laser spot and laser power.so the outlet of tube is up.
3.Please make sure that full water in laser tube, in order to fully circulate the cooling water of the laser tube,it's necessary to ensure that the water flow entersfrom low point and drain away from the high point under the pressure of the water so as to achieve the cooling of the entire laser tube.if the cooling water can not fill the whole pipe,result in poor cooling,power reduction and the phenomenon of laser tube burst.
Product parameters:
Model | Length | Diameter | Power | Max power | Operating current | Ignition current | Ignition voltage | Catalyst | Warranty |
Z40 | 700mm | 50mm | 40w | 42w | About 10mA | 3-5mA | 18-23KV | No | 150days |
Z60 | 1200mm | 60mm | 60w | 85w | About 20mA | 4-5mA | 26-28KV | Yes | 150days |
Z80 | 1250mm | 80mm | 80w | 95w | 28mA | 4-5mA | 26-28KV | Yes | 200days |
Z100 | 1450mm | 80mm | 100w | 115w | 30mA | 4-5mA | 26-28KV | Yes | 200days 210days |
Z130 | 1650mm | 80mm | 130w | 140w | 30mA | 4-5mA | 26-28KV | Yes | 200days |
S80 | 1250mm | 80mm | 80w | 100w | 28mA | 4-5mA | 26-28KV | Yes | 300days |
S100 | 1450mm | 80mm | 100w | 120w | 30mA | 4-5mA | 26-28KV | Yes | 300days 210days |
S130 | 1650mm | 80mm | 130w | 150w | 30mA | 4-5mA | 26-28KV | Yes | 300days |
S150 | 1850mm | 80mm | 150w | 165w | 30mA | 4-5mA | 26-28KV | Yes | 300days |
ZS80 | 1200mm | 80mm | 80w | 105w | 28mA | 4-5mA | 26-28KV | Yes | 1 Year |
ZS100 | 1400mm | 80mm | 100w | 125w | 28mA | 4-5mA | 26-28KV | Yes | 1 Year |
ZS130 | 1650mm | 80mm | 130w | 155w | 30mA | 4-5mA | 26-28KV | Yes | 1 Year |
ZS150 | 1850mm | 80mm | 150w | 180w | 30mA | 4-5mA | 26-28KV | Yes | 1 Year |
Z40,Z60,Z80,Z100,Z130, This kind of laser tube is stable laser tube, quality is very stable , minimum using life is 200days.
(warranty 200days)
S80,S100,S130,S150, This kind of laser tube is enhanced, minimum using life is 300days ,the raw of Co2 laser tube body and cavities mirror is imported, meanwhile has authentic USA gas. so definitely improve power and using life .
The appearance is same with EFR ‘s F series laser tube. (warranty 300days)
ZS80, ZS100, ZS130, ZS150,Co2 laser tube is using life which is more better than Z and S series. The minimum using life of ZS series is 1 year. The appearance looks more beautiful. (warranty 360days)
- Download
- wholesale-VIP price.pdf