Home > Products > Laser Power Supply > Co2 150W laser power supply

Product Description

Laser Co2 power supply 150w

Laser power is a high-performance automatic ignition constant current power supply, divided into continuous laser power and pulsed laser power supply 2, continuous laser power is a high performance automatic ignition constant current power supply, pulse laser power is dedicated to pulsed

1.Adopting zero current half-bridge soft switch circuit, the power supply is featured by high efficiency and rapid response, and easy to match laser tubes of manufacturers.

2.It has simple port control, fits high and low level signals, can control laser start and stop through TTL level, and is equipped with abnormal protection switch to detect if there is water or ventilation outside.

3.Laser power can be regulated by inputting 0-5V simulation signal or inputting PWM signal.

4.The laser power supply has open circuit protection function: Under the condition of good earthing protection, the power supply can work in open circuit in short time, and then it can avoid the damage caused by laser tube cracking.

5.Ex-factory aging test: Each laser power supply can undergo a 12h aging test at high temperature of 60ºC on full load, and 500 times of 7sec power-on/off tests.
 

Main Technical Data:

AC input voltage

AC220V or AC110V

DC input voltage

DC300V or DC150V

AC input frequency

47~440Hz

Maximum voltage output

50KV

Maximum current

38mA(according to laser tubes of different manufacturers)

Efficiency

91%

Overcurrent protection

130% of maximum current

Open circuit protection

Yes (short time)

Structure

Fan cooling

High level control voltage range

≥3V

Low level control voltage range

≤0.8V

Operating temperature

-30℃~+65℃

Relative humidity

20~85%RH(noncondensing)

Withstand voltage

Input—output

AC1500V1 min ≤10mA

Input—shell

AC1500V1 min ≤10mA

Output—shell

Connection

Insulation resistance

≥50MΩ(DC500V)

Earth leakage current

≤1mA(AC220V)≤0.5 mA(AC110V)

Vibration resistance

Amplitude 0.5mm frequency 10~55Hz three-dimensional direction 2h

Fault-free time MTBF

≥30,000hours

60ºC high temperature test time on full load

12 hours

7s power on/off test

500

Maximum size (L*W*H)

320mm*220mm*80mm


Product parameters:

Model  

Power   watt

N.W

FBT

Warranty

P60

60W

2.2kg

2pcs

1year

P80

80W

2.95kg

2pcs

1year

P100

100W

4.6kg

3pcs

1year

P130

130W

4.6kg

3pcs

1year

P150

150W

4.6kg

3pcs

1year



Please feel free to give your inquiry in the form below.
* Subject :
* Email :
  • Name :

  • Phone :

  • *Message :
    Message